Super Sprout

Well hello lovely ones. How are we all on this chilly wet November evening? Hope you are all snuggled up with a crochet hook and a bundle of yarn. It’s a bit nippy isn’t it. We braved the weather for a spot of Park Runs and National Trusts today, but I’m rather pleased to be tucked up inside now with my little tribe in the warm.

So I thought I would go back in time and bring you this little man’s pattern again from a couple of years ago. It’s a lovely little pattern, perfect for a winters evening to make up and would be great for a Christmas present for someone.

I’m sure you are wondering why I even came round to crocheting a Sprout, well here’s how.

A winters day, a few years ago, we were in the supermarket, getting our big Christmas shop and we spotted a lowly little Sprout all by itself on the floor. It was nowhere near its little friends! My daughter immediately said it must have been a Super Sprout, that spends its evenings keeping the naughty peas in check in the supermarket. “It’s just like in the book!” She squealed!! She was referring to the Supertato book that they had read in Reception as a class.

The super potato basically saves the vegetables from a naughty pea that escapes from the freezer and causes havoc!!! She then insisted that I must crochet one and that I could put it on my blog! So without further a do. May I present Super Sprout. (You have to admit, he’s rather sweet!) He’s been snuggled up in my daughter’s bed time ever since. Anywho, back to crocheting. Right usual information on stitches here and supplies and then the pattern. Photos are on the go, so hope they all make sense. I only had a day to make him. So it was a bit of a quick one this one. She definitely loved finding him under the Christmas tree.

Stitches

Slip stitch (ss) – This is where there is no height to the stitch. It’s usually used to join rounds. So insert the hook into the front of the stitch you are joining to. This is usually the first stitch you made in that round/row. So yarn over hook and pull through that first stitch then also through the loop on your hook.

Double Crochet (dc) – Insert the hook through the stitch, front to back, then yarn over hook and pull back through stitch. You will have two loops on your hook. Then yarn over your hook and pull through both loops.

Double Crochet Decrease (2dctog) – This is where you crochet two stitches together to decrease the amount of stitches in the round. So insert the hook through the front of the first stitch only (the front V) and then insert again through the front of the second stitch (the front V). Now yarn over your hook and pull it back through both stitches, so you will then have 2 loops on your hook. Yarn over your hook again and pull through both loops. And there is your 2dctog. (Basically 2 double crochet stitches crocheted together.)

Treble (tr) – To make a treble crochet, firstly yarn over your hook, insert through space/stitch, yarn over your hook, pull back through space/stitch. There should now be 3 loops on your hook. Then yarn over hook and pull through the first two loops, yarn over hook and pull through the last two loops.

Half treble (htr) – A half treble crochet is basically one less movement than a treble. So yarn over hook, insert through space/stitch, yarn over hook, pull back through space/stitch. There should be 3 loops on your hook. Then yarn over hook and pull through all 3 loops.

Double treble (dtr) – A double treble is quite a tall stitch. So yarn over hook twice, insert hook through the stitch/space and then yarn over hook again. Now pull the yarn through the stitch. There will now be 4 loops on the hook. Now place the yarn over the hook and pull through the first 2 loops. Then yarn over the hook again and pull through the next two loops. Haha, now place the yarn over the hook again and pull through the last 2 loops. Phew! It’s a bit of a long process, but a lovely stitch with the height that it gives.

Supplies

So for Mr Super Sprout you will need some green yarn, I have used stylecraft cotton, but you can use wool or any green yarn really. Some scissors, a blunt ended tapestry needle, some toy stuffing and little bit of black yarn for the face. Oh and I nearly forgot a 3mm and a 4mm hook. The 3mm hook is for the body and the 4mm hook is for the leaves.

So here we go…

Body – use a 3mm hook with your green yarn. You are working in the round for the body.

1 – Make a magic ring, chain 1, then dc6 into the ring. Then pull the tail tight to create the first round. (6)

2 – 2dc into each stitch. Work ** 6 times. (12)

3 – 1dc, then 2dc into each stitch. Work ** 6 times. (18)

4 – 2dc, then 2dc into each stitch. Work ** 6 times. (24)

5 – 3dc, then 2dc into each stitch. Work ** 6 times. (30)

6 – 4dc, then 2dc into each stitch. Work ** 6 times. (36)

7 – 5dc, then 2dc into each stitch. Work ** 6 times. (42)

8 – 13 For each round, 1dc in each stitch. (42)

14 – 5dc, then 2dctog. Work ** 6 times. (See stitches explanation above if you are unsure of 2dctog.) (36)

15 – 4dc, then 2dctog Work ** 6 times. (30)

16 – *3dc, then 2dctog. Work ** 6 times. (24)

17 – 2dc, then 2dctog. Work ** 6 times.(18)

18 – 1dc, then 2dctog. Work ** 6 times.(12)

Now it’s time to stuff your body with toy stuffing,

19 – Work 2dctog 6 times (6)

Now sew up and fasten off your body using a blunt ended tapestry needle. You will notice that it gives a little bit of a point. This is where you can attach the base of your 4 leaves to.

Leaves – use a 4mm hook with your green yarn. Make two of each size. (Two small and two large.) For all of the leaves you are now working in rows and not rounds.

For both leaves –

1 – Make a slip knot on your hook and chain 4.

2 – Now work a htr into the third stitch from the hook and another htr into the next stitch from the hook. Turn your work now, so that you can crochet back along the row. (2)

3 – In this row, chain 2 and work 2htr stitches into each stitch and turn your work. (4)

4 – Then chain 2 and work 1htr into the same stitch, then 2htr into the next stitch. Repeat ** twice and then turn your work. (6)

5 – Then chain 2 and work 2htr, then 2htr into the next stitch Repeat ** twice and turn your work. (8)

6 – Now chain 2 then work 3htr, then 2htr into the next stitch. Repeat ** twice and turn. (10)

7 – Now chain 2 and then work 4htr, then 2htr in the next stitch. Repeat ** twice and turn your work. (12)

Now make two small leaves:

8 – 9 For each row, chain 2 then work 1htr into each stitch and turn. (12)

Now make two large stitches:

8 – 11 For each row, chain 2 then work 1htr into each stitch and turn. (12)

Now the next two rows are the same for both the small and the large leaves. So you are either on round 10 for the small leaf or round 12 for your large leaf.

  • Slip stitch into the first stitch, dc, htr, tr, tr, dtr, dtr, tr, tr, htr, dc then lastly a slip stitch. Then turn your work. (12)
  • For the last row, miss the first stitch then slip stitch into the next stitch, then dc, htr, tr, dtr, dtr, tr, htr, dc, then miss a stitch and slip stitch into the last stitch and fasten off. (10)

Right so this is what you should now have in front of you. One round ball, two large leaves and two small sprout leaves.

Now it’s time to sew the Sprout leaves in place. So start off by using the tail from the base of the leaf. So find the tip of the Sprout ball (its slightly raised) and using a blunt ended needle, sew on the first leaf base and fasten off. You will only be able to sew on the base as your tail of yarn is quite short.

Now move to the top of your sprout and using the top tail sew on the sides on the leaf but not the top.

Leaving the top part free, allows the leaf to have some movement.

Then carry on adding the other 3 leaves in the same way.

And now for the fun part. The eyes, eyebrows and smile. You need your black yarn, needle and scissors. (Don’t forget you can make the expression anyway you like.)

For the eyes. Attach by knotting one end and threading it through a gap in between a stitch at the back of the body. This will hide the end. Now pull the needle through where you would like the eye to be. I tend to sew over one stitch to make the eye and sew over this stitch about 5 times. You can add eyebrows in the same way but with one stitch. I love the simpleness of the eyebrows. They can make such a difference to a face!!

For the mouth. Pull the yarn through where you would like the mouth to start then thread back through where you want the mouth to finish. Now here’s the tricky part. You now need to anchor the mouth in the middle to make it a smile. So simply push the yarn back up in the middle of the mouth by one stitch lower, go over the top of the mouth, then back through the same stitch. This will give you the smile. Again simple, but effective.

And there you have it – one little Super Sprout to start you feeling that little bit Christmassy. I was thinking today, you could make a whole family of sprouts or even crochet them some Santa hats!! Proper cute.

Well I hope you have enjoyed my pattern. As always, if you have any questions or queries at all, please don’t hesitate to ask!! Looking forward to seeing all other little sprouts made – don’t forget to share your little fellas on here or on instagram/facebook.

Happy hooking everyone!!

🌈 Xx

(Free pattern designed and brought to you by PipsRainbow. Thank you for not copying or recreating it. ☺️Xx)

Continue Reading

Mr and Mrs Turtle

Well, the end of our lovely summer holiday is finally here and our little rainbowbods are going to be starting back into their new academic years. We’ve had an absolute ball this summer and we are definitely not ready to get back into normalness again! Boohoo!! I’m feeling decidedly wobbly about next week and the new chapters that my two are starting out on. I know they have to spread their wings and fly, but boy how I have loved having them under my wing for 6 weeks. Just the best.

I think our summer has mainly consisted of – beaches, the sea, body boarding, waves, bbq’s, bike rides, family walks, friends, baking, swimming, day dreaming, playing, parks, cuppas, a serious amount of ice creams, cakes, curries, Reading, weaving, loom bands, braids, camping in a caravan, National Trust trips, Bore Street Bakery trips, Toy Story 4 and obviously a rather large amount of crocheting. I don’t reckon we could have fitted much else in!

Now there are four little fellas that will help us remember the Summer of 2019 and here they are.

You’ve obviously met Paddy and Ivey, so now I would like to introduce you to Boo and Flip. Boo (second from the left) is a very proud Daddy of his two little squirts. He is always finding new adventures that they can all go on and keeps them on their toes with excitement. Flip (second from the right) is the Mummy turtle. She loves keeping them all close, under her flipper, but will always be up for any adventure that Boo has concocted up!! She is always by his side, following him in whatever path he takes. Two hearts as one, having lots and lots of fun.

So this is the free pattern for the two parent turtles, but if you want to make the little brother and sister, Paddy and Ivey too, you can either find the pattern in the pattern list or follow the link below. Happy hooking!

https://pipsrainbow.com/little-paddy-ivey-turtle/

Level – Easy

Supplies –

Right then, supplies. As this is a Using Up Year pattern, I have used lots of odds and ends to make my little turtles. Each little turtle uses a total of 90g of double knit yarn, so that will give you a rough idea of how much you will need.

(Also, quick tip, if you have lots of 4ply that you want to use up, you can always work 2 strands together to create a double knit weight yarn. I did this for Mr Turtle. It’s a great way to use up yarn.

You will also need a 3mm crochet hook, some scissors, toy stuffing, a piece of different coloured yarn for a stitch marker and a blunt ended tapestry needle to sew all your ends in. And don’t forget a pair of safety eyes, if you want to use them and some black yarn for the eyebrows and mouth.

I think these two are enjoying a snuggle in the garden. A mummy and daughter relationship is so special.

Hmmm, these two seem to be up to something?!?! I wonder what rascalliness can a Daddy and son create?!?

Stitches –

Magic Ring (mr) – For a magic ring, make a loop with the yarn, leaving a tail. (Make sure the tail is under the working yarn.) Now insert your hook into the loop, from the front to the back. Wrap the working yarn around your hook and pull the yarn through and pull tight to create a ring.

If you are unsure, here’s a little video on how to make a Magic Ring.

Slip stitch (ss) – This is where there is no height to the stitch. It’s usually used to join rounds. So insert the hook into the front of the stitch you are joining to. This is usually the first stitch you made in that round/row. So yarn over hook and pull through that first stitch then also through the loop on your hook.

Double Crochet (dc) – Insert the hook through the stitch, front to back, then yarn over hook and pull back through stitch. You will have two loops on your hook. Then yarn over your hook and pull through both loops.

Double Crochet Decrease (2dctog) – This is where you crochet two stitches together to decrease the amount of stitches in the round. So insert the hook through the front of the first stitch only (the front V) and then insert again through the front of the second stitch (the front V). Now yarn over your hook and pull it back through both stitches, so you will then have 2 loops on your hook. Yarn over your hook again and pull through both loops. And there is your 2dctog. (Basically 2 double crochet stitches crocheted together.)

If you need a quick recap on how to do these stitches and a few other snippets of Amigurumi techniques, then follow the link below. Happy watching.

Ok so here we go…

Body

1 – Using your 3mm hook, make a magic ring, chain 1 and then work 6dc stitches into the ring. (6)

2 – *2dc into each stitch.* Work ** 6 times. (12)

3 – 6 (4 rounds) Work 1dc in each stitch. (6)

7 – *1dc, then 2dc into each stitch.* Work ** 6 times. (18)

8 – *2dc, then 2dc into each stitch.* Work ** 6 times. (24)

9 – *3dc, then 2dc into each stitch.* Work ** 6 times. (30)

10 – *4dc, then 2dc into each stitch.* Work ** 6 times. (36)

11 – 14 (4 rounds) Work 1dc in each stitch. (36)

15 – Work 2dc in the first stitch then work 1dc in the next 17 dc stitches. Now work 2dc in next stitch, followed by 17dc stitches. (38)

16 – Work 2dc in the first stitch then work 1dc in the next 18 dc stitches. Now work 2dc in next stitch, followed by 18dc stitches. (40)

17 – Work 2dc in the first stitch then work 1dc in the next 19 dc stitches. Now work 2dc in next stitch, followed by 19dc stitches. (42)

18 – Work 2dc in first stitch then work 1dc in the next 20 dc stitches. Now work 2dc in next stitch, followed by 20dc stitches. (44)

19 – 22 (4 rounds) Work 1dc in each stitch. (44)

23 – Work 2dctog, then work 1dc in the next 20 stitches. Followed by 2dctog stitch and then 20dc stitches. (42)

24 – Work 2dctog, then work 1dc in the next 19 stitches. Followed by 2dctog stitch and then 19dc stitches. (40)

25 – Work 2dctog, then work 1dc in the next 18 stitches. Followed by 2dctog stitch and then 18dc stitches. (38)

26 – Work 2dctog, then work 1dc in the next 17 stitches. Followed by 2dctog stitch and then 17dc stitches. (36)

27 – Work 2dctog, then work 1dc in the next 16 stitches. Followed by 2dctog stitch and then 16dc stitches. (34)

28 – Work 2dctog, then work 1dc in the next 15 stitches. Followed by 2dctog and then 15dc stitches. (32)

29 – 30 (2 rounds) Work 1dc in each stitch. (32)

31 – Work 2dctog, then work 1dc in the next 14 stitches. Followed by 2dctog and then 14dc stitches. (30)

32 – Now work *3dc, then 2dctog.* Repeat this ** 6 times. (24)

33 – Now work *2dc, then 2dctog.* Repeat this ** 6 times. (18)

34 – Work *1dc, then 2dctog* Repeat this ** 6 times. (12)

35 – Work *2dctog* Repeat this ** 6 times. (6)

Now it’s time to fasten off, stuff your turtle’s body and then sew it up with your yarn tail.

Head

1 – Make a magic ring, chain 1 and then work 6 dc stitches into the ring. (6)

2 – *2dc into each stitch.* Work ** 6 times. (12)

3 – *1dc, then 2dc into each stitch.* Work ** 6 times. (18)

4 – *2dc, then 2dc into each stitch.* Work ** 6 times. (24)

5 – *3dc, then 2dc into each stitch.* Work ** 6 times. (30)

6 – *4dc, then 2dc into each stitch.* Work ** 6 times. (36)

7 – *5dc, then 2dc into each stitch.* Work ** 6 times. (42)

8 – *6dc, then 2dc into each stitch.* Work ** 6 times. (48)

9 – 14 (6 rounds) Work 1dc in each stitch. (48)

15 – Now work *6dc, then 2dctog.* Repeat this ** 6 times. (42)

16 – Now work *5dc, then 2dctog.* Repeat this ** 6 times. (36)

17 – Now work *4dc, then 2dctog.* Repeat this ** 6 times. (30)

18 – Now work *3dc, then 2dctog.* Repeat this ** 6 times. (24)

19 – Now work *2dc, then 2dctog.* Repeat this ** 6 times. (18)

21 – 25 (4 rounds) Work 1dc in each stitch. (18)

Finish your head, by slip stitching into the next stitch and fasten off. Now stuff your head with your toy stuffing so that it will be ready to then sew on to your turtle’s body.

At this stage, you could attach your safety eyes. With the eyes, you need to make sure you have them in the correct place, because once you have pushed the back on. It is very hard to get them off. So keep looking and checking that you are happy. Remember the dome on the back of the safety eye faces out. This is how it stays secure on your turtle’s head.

Shell

With the shell, I have used lots of different colours. It’s a great way to use up lots of little bits of yarn and you can start new yarns at any part of each round. As this is a double knit pattern, you can even use 2 x 4ply yarns together. I love creating lots of different colour ways with this method.

1 – Make a magic ring, chain 1 and then work 6 dc stitches into the ring. (6)

2 – Work *2dc into each stitch.* Work ** 6 times. (12)

3 – Work 1dc in each stitch. (12)

4 – Work *1dc, then 2dc into each stitch.* Work ** 6 times. (18)

5 – Work 1dc in each stitch. (18)

6 – *2dc, then 2dc into each stitch.* Work ** 6 times. (24)

7 – *3dc, then 2dc into each stitch.* Work ** 6 times. (30)

8 – *4dc, then 2dc into each stitch.* Work ** 6 times. (36)

9 – Work 1dc in each stitch. (36)

10 – *5dc, then 2dc into each stitch.* Work ** 6 times. (42)

11 – Work 1dc in each stitch. (42)

12 – *6dc, then 2dc into each stitch.* Work ** 6 times. (48)

13 – *7dc, then 2dc into each stitch.* Work ** 6 times. (54)

14 – Work 1dc in each stitch. (36)

15 – *8dc, then 2dc into each stitch.* Work ** 6 times. (60)

16 – Work 1dc in each stitch. (60)

17 – *9dc, then 2dc into each stitch.* Work ** 6 times. (66)

18 – Work 1dc in each stitch. (66)

19 – *1dc in the first stitch. Then 1dc in next. Miss a stitch then 4tr stitches in the next stitch. Then miss 2 stitches. *Repeat after the last 4tr stitches, Miss the 2 stitches and then slip stitch into the first dc stitch from the start of the round. (66)

20 – Work 1dc in each stitch, then slip stitch into the first stitch and fasten off, leaving a tail to attach the shell to the body. (66)

Front Flipper x 2

1 – Start by working 12 chain stitches, then slip stitch into the first chain to make a ring.

2 – Now work 1dc in each chain (12)

3 – Work 1dc in each stitch. (12)

4 – Work *1dc, then 2dc into each stitch.* Work ** 6 times. (18)

5 – *2dc, then 2dc into each stitch.* Work ** 6 times. (24)

6 – 7 (2 rounds) Work 1dc in each stitch. (24)

6 – Work 2dc in the next 6 stitches. Follow this by working 1dc in the next 18 stitches. (30)

6 – Work 2dc in the next 6 stitches. Follow this by working 1dc in the next 24 stitches. (36)

7 – Work 1dc in each stitch. (36)

8 – Work 24dc stitches. Then work *2dctog.* Repeat this ** 6 times. (30)

8 – Work 18dc stitches. Then work *2dctog.* Repeat this ** 6 times. (24)

8 – Work 12dc stitches. Then work *2dctog.* Repeat this ** 6 times. (18)

9 – Work 6dc stitches. Then work *2dctog.* Repeat this ** 6 times. (12)

10 – Work *2dctog.* Repeat this ** 6 times. (6)

Now slip stitch into the next stitch and fasten off. Leave the tail quite long, so you can use the tail to sew the leg onto the body.

Back Flipper x 2 –

1 – Start by working 8 chain stitches then slip stitch into the first chain to make a ring.

2 – Work 1dc in each chain. (8)

3 – Now work 1dc in each stitch. (8)

4 – *Work 1dc, then 2dc in the next stitch.* Repeat this ** 4 times. (12)

5 – *1dc, then 2dc into next stitch.* Work ** 6 times. (18)

6 – *2dc, then 2dc into the next stitch.* Work ** 6 times. (24)

7 – Work 1dc in each stitch. (24)

8 – *3dc, then 2dc into each stitch.* Work ** 6 times. (30)

9 – 10 (2 rounds) Work 1dc in each stitch. (30)

11 – Work 2dc in the next 6 stitches. Follow this by working 1dc in the next 24 stitches. (36)

12 – Work 2dc in the next 6 stitches. Follow this by working 1dc in the next 30 stitches. (42)

13 – Now work *5dc, then 2dctog.* Repeat this ** 6 times. (36)

14 – Now work *4dc, then 2dctog.* Repeat this ** 6 times. (30)

15 – Now work * 2dctog.* Repeat this ** 6 times. Then work 18 dc stitches. (24)

16 – Now work *2dc, then 2dctog.* Repeat this ** 6 times. (18)

17 – Now work *1dc, then 2dctog.* Repeat this ** 6 times. (12)

18 – Work *2dctog.* Repeat this 6 times. (6)

And there we have it. Your 7 little turtle parts. Now it’s time to sew it altogether. I usually start with the head and then the front legs follows by the back legs. And finally the shell. If you would like a firm shell, you can add a little stuffing in the top of the shell before you sew it up.

Once you have sewed them all on, it’s time to use your black thread and needle to sew on your little eyebrows and mouth.

And there you have your turtle. Here’s my Daddy and Mummy turtle. Think they are attempting to play in the canal, cheeky chappies!!

I really hope you have enjoyed this pattern. Can’t wait to see all your little turtle creations. Don’t forget to share them and link me in.

For an extra special touch, you might like to do is initial the right back flipper with your black thread. Reminds me of Toy Story and all of the toys feet!

Any problems just give me a shout.

Happy hooking chaps!!!

🌈Xx

Continue Reading